NC-Dividing Units EDR-EDS
NC-dividing units EDR can be used with a horizontal or vertical turning axis. They are available with center heights of 125, 160, 220 and 300 mm. Swivel indexing devices EDS use dividing units EDR for rotation and swivel axis. Both devices are specially designed for use on EDM machines.
SERIES EDR
- Single-Axis NC-Dividing Unit for use on EDM machines with horizontal or vertical turning axis.
- These units are issued with IP67 protection class and use non-corrosive materials to enable use in a corrosive non-conductor.
- Compact, space saving design for heavy duty machining operation.
- High flexibility through variable modular system.
- Slightly modify to spatial conditions by mounting drive motor at housing left hand or right hand.
- Indexing Spindle with bore pattern available to customers specification.
- Allow the worm gear to be set to a low amount of Play.
- Allows play in the worm gear to be adjusted.
- Using of indirect and direct measuring systems in according to needed indexing accuracy.
- Earth connection am Gehäuse immediate at the indexing spindle.
- Low maintenance due to permanent lubrication.
Connection
The connection of the NC-Dividing Unit EDR is made alternatively as:
- Integrated 4th axis with consisted AC-servo motors for existing machine control
- Positioning axis with HOFMANN Single-Axis-Positioning-Control. The connection to the machine control is based on the M-Signal-Function.
SERIES EDS
- Swivelling NC-indexing devices for use on EDM machines with horizontal or vertical turning axis consisting of two dividing units of the series EDR.
- These units are issued with IP67 protection class and use non-corrosive materials to enable use in a corrosive non-conductor.
- High flexibility through variable modular system.
- Slightly modify to spatial conditions by mounting drive motor at housing left hand or right hand.
- Indexing Spindle with bore pattern available to customers specification.
- Using of indirect and direct measuring systems in according to needed indexing accuracy.
- Earth connection am Gehäuse immediate at the indexing spindle.
- Low maintenance due to permanent lubrication.
Connection
The connection of the NC-Dividing Unit EDS is made alternatively as:
- Rotation and tilting axis used as integrated 4th and 5th axis with consisted AC-servo motors for existing machine control.
- Rotation and tilting axis used as positioning axis with HOFMANN Two-Axis-Positioning-Control.The connection to the machine control is based on the M-Signal-Function.
- Rotation axis used as integrated 4th axis with consisted AC-servo motors for existing machine control. Tilting axis used as positioning axiss with HOFMANN Single-Axis-Positioning-Control. he connection to the machine control is based on the M-Signal-Function.
