Success Stories

Success Stories

Success Stories

HOFMANN RWNC-220 Additional Axis

This double-spindle machining centre has a special characteristics: the parts are clamped faced not side by side as usual, because of the insufficient space into the machining center. Furthermore a real 5-site-edit is possible. The whole workpiece is finished in two settings.


Success Stories

New Dividing Center from HOFMANN

For a customer from a german machine tool manufacturer, HOFMANN delivered three NC-dividing units RWNC-220 in a special customized version. The additional axises are based on a HOFMANN dividing unit RWNC-220 with customer specifications.



Success Stories

HOFMANN RWNC-300 LD- Additional Axis

HOFMANN Mess- und Teiltechnik delivered eight HOFMANN RWNC-300 LD additional axis for four Heller MC 16 machining centers from an automotive supplier. Through the expansion with two additional axis per machining center, he could handle a major order. Furthermore, the machining centers, which are used for several years, were significant upgraded.


Success Stories

HOFMANN RWNC-160 six-spindle axle

With this additional axis it is possible to use different clamping systems for clamping workpieces. Among their special features are six spindles – only one spindle is normal – which can be driven simultaneous on a drive engine.