Success Stories

Success Stories

success stories

HOFMANN RWNC-220 Additional Axle

The special feature of this so-called double spindle machine is that the workpiece are not clamped next to each other, as normal, but opposite each other due to the lack of space in the machining center. In addition, a real 5-sided machining is possible and the entire workpiece is finished with only two setups.


success stories

New Dividing Unit from HOFMANN

For the customer of a well-known German machine tool manufacturer, a total of three HOFMANN dividing units RWNC-220 were supplied in special design. The add-on axes are special designs according to customer requirements based on a Hofmann dividing unit RWNC-220.



Success Stories

HOFMANN RWNC-300 LD- Additional Axis

HOFMANN Mess- und Teiltechnik delivered eight HOFMANN RWNC-300 LD additional axis for four Heller MC 16 machining centers from an automotive supplier. Through the expansion with two additional axis per machining center, he could handle a major order. Furthermore, the machining centers, which are used for several years, were significant upgraded.


Success Stories

HOFMANN RWNC-160 six-spindle axle

With this additional axis it is possible to use different clamping systems for clamping workpieces. Among their special features are six spindles – only one spindle is normal – which can be driven simultaneous on a drive engine.